Merge 5.15.131 into android13-5.15-lts
Changes in 5.15.131
erofs: ensure that the post-EOF tails are all zeroed
ksmbd: fix wrong DataOffset validation of create context
ksmbd: replace one-element array with flex-array member in struct smb2_ea_info
ARM: pxa: remove use of symbol_get()
mmc: au1xmmc: force non-modular build and remove symbol_get usage
net: enetc: use EXPORT_SYMBOL_GPL for enetc_phc_index
rtc: ds1685: use EXPORT_SYMBOL_GPL for ds1685_rtc_poweroff
modules: only allow symbol_get of EXPORT_SYMBOL_GPL modules
USB: serial: option: add Quectel EM05G variant (0x030e)
USB: serial: option: add FOXCONN T99W368/T99W373 product
ALSA: usb-audio: Fix init call orders for UAC1
usb: dwc3: meson-g12a: do post init to fix broken usb after resumption
usb: chipidea: imx: improve logic if samsung,picophy-* parameter is 0
HID: wacom: remove the battery when the EKR is off
staging: rtl8712: fix race condition
Bluetooth: btsdio: fix use after free bug in btsdio_remove due to race condition
wifi: mt76: mt7921: do not support one stream on secondary antenna only
serial: qcom-geni: fix opp vote on shutdown
serial: sc16is7xx: fix broken port 0 uart init
serial: sc16is7xx: fix bug when first setting GPIO direction
firmware: stratix10-svc: Fix an NULL vs IS_ERR() bug in probe
fsi: master-ast-cf: Add MODULE_FIRMWARE macro
tcpm: Avoid soft reset when partner does not support get_status
nilfs2: fix general protection fault in nilfs_lookup_dirty_data_buffers()
nilfs2: fix WARNING in mark_buffer_dirty due to discarded buffer reuse
pinctrl: amd: Don't show `Invalid config param` errors
usb: typec: tcpci: move tcpci.h to include/linux/usb/
usb: typec: tcpci: clear the fault status bit
Linux 5.15.131
Change-Id: If396fd54c8778ca22748eb36b3d16de73c49724a
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
diff --git a/Makefile b/Makefile
index 45fa371..d0d2d98 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
VERSION = 5
PATCHLEVEL = 15
-SUBLEVEL = 130
+SUBLEVEL = 131
EXTRAVERSION =
NAME = Trick or Treat
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 83cfbb8..7f6bd7f 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -220,8 +220,6 @@
{
schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125));
}
-EXPORT_SYMBOL(sharpsl_battery_kick);
-
static void sharpsl_battery_thread(struct work_struct *private_)
{
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 371008e..264de0bc 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -9,7 +9,6 @@
*/
#include <linux/kernel.h>
-#include <linux/module.h> /* symbol_get ; symbol_put */
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/gpio_keys.h>
@@ -514,17 +513,6 @@
.gpio_cs = SPITZ_GPIO_ADS7846_CS,
};
-static void spitz_bl_kick_battery(void)
-{
- void (*kick_batt)(void);
-
- kick_batt = symbol_get(sharpsl_battery_kick);
- if (kick_batt) {
- kick_batt();
- symbol_put(sharpsl_battery_kick);
- }
-}
-
static struct gpiod_lookup_table spitz_lcdcon_gpio_table = {
.dev_id = "spi2.1",
.table = {
@@ -552,7 +540,7 @@
.max_intensity = 0x2f,
.default_intensity = 0x1f,
.limit_mask = 0x0b,
- .kick_battery = spitz_bl_kick_battery,
+ .kick_battery = sharpsl_battery_kick,
};
static struct pxa2xx_spi_chip spitz_lcdcon_chip = {
diff --git a/arch/mips/alchemy/devboards/db1000.c b/arch/mips/alchemy/devboards/db1000.c
index 2c52ee2..50de86e 100644
--- a/arch/mips/alchemy/devboards/db1000.c
+++ b/arch/mips/alchemy/devboards/db1000.c
@@ -14,7 +14,6 @@
#include <linux/interrupt.h>
#include <linux/leds.h>
#include <linux/mmc/host.h>
-#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/spi/spi.h>
@@ -167,12 +166,7 @@
static irqreturn_t db1100_mmc_cd(int irq, void *ptr)
{
- void (*mmc_cd)(struct mmc_host *, unsigned long);
- /* link against CONFIG_MMC=m */
- mmc_cd = symbol_get(mmc_detect_change);
- mmc_cd(ptr, msecs_to_jiffies(500));
- symbol_put(mmc_detect_change);
-
+ mmc_detect_change(ptr, msecs_to_jiffies(500));
return IRQ_HANDLED;
}
diff --git a/arch/mips/alchemy/devboards/db1200.c b/arch/mips/alchemy/devboards/db1200.c
index 1864eb9..76080c7 100644
--- a/arch/mips/alchemy/devboards/db1200.c
+++ b/arch/mips/alchemy/devboards/db1200.c
@@ -10,7 +10,6 @@
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/init.h>
-#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/leds.h>
@@ -340,14 +339,7 @@
static irqreturn_t db1200_mmc_cdfn(int irq, void *ptr)
{
- void (*mmc_cd)(struct mmc_host *, unsigned long);
-
- /* link against CONFIG_MMC=m */
- mmc_cd = symbol_get(mmc_detect_change);
- if (mmc_cd) {
- mmc_cd(ptr, msecs_to_jiffies(200));
- symbol_put(mmc_detect_change);
- }
+ mmc_detect_change(ptr, msecs_to_jiffies(200));
msleep(100); /* debounce */
if (irq == DB1200_SD0_INSERT_INT)
@@ -431,14 +423,7 @@
static irqreturn_t pb1200_mmc1_cdfn(int irq, void *ptr)
{
- void (*mmc_cd)(struct mmc_host *, unsigned long);
-
- /* link against CONFIG_MMC=m */
- mmc_cd = symbol_get(mmc_detect_change);
- if (mmc_cd) {
- mmc_cd(ptr, msecs_to_jiffies(200));
- symbol_put(mmc_detect_change);
- }
+ mmc_detect_change(ptr, msecs_to_jiffies(200));
msleep(100); /* debounce */
if (irq == PB1200_SD1_INSERT_INT)
diff --git a/arch/mips/alchemy/devboards/db1300.c b/arch/mips/alchemy/devboards/db1300.c
index cd72eaa..ca71e5e 100644
--- a/arch/mips/alchemy/devboards/db1300.c
+++ b/arch/mips/alchemy/devboards/db1300.c
@@ -17,7 +17,6 @@
#include <linux/interrupt.h>
#include <linux/ata_platform.h>
#include <linux/mmc/host.h>
-#include <linux/module.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/platnand.h>
#include <linux/platform_device.h>
@@ -459,14 +458,7 @@
static irqreturn_t db1300_mmc_cdfn(int irq, void *ptr)
{
- void (*mmc_cd)(struct mmc_host *, unsigned long);
-
- /* link against CONFIG_MMC=m. We can only be called once MMC core has
- * initialized the controller, so symbol_get() should always succeed.
- */
- mmc_cd = symbol_get(mmc_detect_change);
- mmc_cd(ptr, msecs_to_jiffies(200));
- symbol_put(mmc_detect_change);
+ mmc_detect_change(ptr, msecs_to_jiffies(200));
msleep(100); /* debounce */
if (irq == DB1300_SD1_INSERT_INT)
diff --git a/drivers/bluetooth/btsdio.c b/drivers/bluetooth/btsdio.c
index 199e8f7..2e4ac39 100644
--- a/drivers/bluetooth/btsdio.c
+++ b/drivers/bluetooth/btsdio.c
@@ -355,6 +355,7 @@
if (!data)
return;
+ cancel_work_sync(&data->work);
hdev = data->hdev;
sdio_set_drvdata(func, NULL);
diff --git a/drivers/firmware/stratix10-svc.c b/drivers/firmware/stratix10-svc.c
index 1bd3979..c61d55e 100644
--- a/drivers/firmware/stratix10-svc.c
+++ b/drivers/firmware/stratix10-svc.c
@@ -623,7 +623,7 @@
paddr = begin;
size = end - begin;
va = devm_memremap(dev, paddr, size, MEMREMAP_WC);
- if (!va) {
+ if (IS_ERR(va)) {
dev_err(dev, "fail to remap shared memory\n");
return ERR_PTR(-EINVAL);
}
diff --git a/drivers/fsi/fsi-master-ast-cf.c b/drivers/fsi/fsi-master-ast-cf.c
index 24292ac..a9abebb 100644
--- a/drivers/fsi/fsi-master-ast-cf.c
+++ b/drivers/fsi/fsi-master-ast-cf.c
@@ -1439,3 +1439,4 @@
module_platform_driver(fsi_master_acf);
MODULE_LICENSE("GPL");
+MODULE_FIRMWARE(FW_FILE_NAME);
diff --git a/drivers/hid/wacom.h b/drivers/hid/wacom.h
index 3f8b24a5..c034a1e 100644
--- a/drivers/hid/wacom.h
+++ b/drivers/hid/wacom.h
@@ -153,6 +153,7 @@
struct input_dev *input;
bool registered;
struct wacom_battery battery;
+ ktime_t active_time;
} remotes[WACOM_MAX_REMOTES];
};
diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c
index 33e763e..76561f5 100644
--- a/drivers/hid/wacom_sys.c
+++ b/drivers/hid/wacom_sys.c
@@ -2535,6 +2535,18 @@
return;
}
+static void wacom_remote_destroy_battery(struct wacom *wacom, int index)
+{
+ struct wacom_remote *remote = wacom->remote;
+
+ if (remote->remotes[index].battery.battery) {
+ devres_release_group(&wacom->hdev->dev,
+ &remote->remotes[index].battery.bat_desc);
+ remote->remotes[index].battery.battery = NULL;
+ remote->remotes[index].active_time = 0;
+ }
+}
+
static void wacom_remote_destroy_one(struct wacom *wacom, unsigned int index)
{
struct wacom_remote *remote = wacom->remote;
@@ -2549,9 +2561,7 @@
remote->remotes[i].registered = false;
spin_unlock_irqrestore(&remote->remote_lock, flags);
- if (remote->remotes[i].battery.battery)
- devres_release_group(&wacom->hdev->dev,
- &remote->remotes[i].battery.bat_desc);
+ wacom_remote_destroy_battery(wacom, i);
if (remote->remotes[i].group.name)
devres_release_group(&wacom->hdev->dev,
@@ -2559,7 +2569,6 @@
remote->remotes[i].serial = 0;
remote->remotes[i].group.name = NULL;
- remote->remotes[i].battery.battery = NULL;
wacom->led.groups[i].select = WACOM_STATUS_UNKNOWN;
}
}
@@ -2644,6 +2653,9 @@
if (remote->remotes[index].battery.battery)
return 0;
+ if (!remote->remotes[index].active_time)
+ return 0;
+
if (wacom->led.groups[index].select == WACOM_STATUS_UNKNOWN)
return 0;
@@ -2659,6 +2671,7 @@
{
struct wacom *wacom = container_of(work, struct wacom, remote_work);
struct wacom_remote *remote = wacom->remote;
+ ktime_t kt = ktime_get();
struct wacom_remote_data data;
unsigned long flags;
unsigned int count;
@@ -2685,6 +2698,10 @@
serial = data.remote[i].serial;
if (data.remote[i].connected) {
+ if (kt - remote->remotes[i].active_time > WACOM_REMOTE_BATTERY_TIMEOUT
+ && remote->remotes[i].active_time != 0)
+ wacom_remote_destroy_battery(wacom, i);
+
if (remote->remotes[i].serial == serial) {
wacom_remote_attach_battery(wacom, i);
continue;
diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c
index 02ca80f..51a8e8d 100644
--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -1134,6 +1134,7 @@
if (index < 0 || !remote->remotes[index].registered)
goto out;
+ remote->remotes[i].active_time = ktime_get();
input = remote->remotes[index].input;
input_report_key(input, BTN_0, (data[9] & 0x01));
diff --git a/drivers/hid/wacom_wac.h b/drivers/hid/wacom_wac.h
index db06084..4ea1910 100644
--- a/drivers/hid/wacom_wac.h
+++ b/drivers/hid/wacom_wac.h
@@ -15,6 +15,7 @@
#define WACOM_NAME_MAX 64
#define WACOM_MAX_REMOTES 5
#define WACOM_STATUS_UNKNOWN 255
+#define WACOM_REMOTE_BATTERY_TIMEOUT 21000000000ll
/* packet length for individual models */
#define WACOM_PKGLEN_BBFUN 9
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index c167186..a281df78 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -523,11 +523,12 @@
of Alcor Micro PCI-E card reader
config MMC_AU1X
- tristate "Alchemy AU1XX0 MMC Card Interface support"
+ bool "Alchemy AU1XX0 MMC Card Interface support"
depends on MIPS_ALCHEMY
+ depends on MMC=y
help
This selects the AMD Alchemy(R) Multimedia card interface.
- If you have a Alchemy platform with a MMC slot, say Y or M here.
+ If you have a Alchemy platform with a MMC slot, say Y here.
If unsure, say N.
diff --git a/drivers/net/ethernet/freescale/enetc/enetc_ptp.c b/drivers/net/ethernet/freescale/enetc/enetc_ptp.c
index bc59489..8c36615 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_ptp.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc_ptp.c
@@ -8,7 +8,7 @@
#include "enetc.h"
int enetc_phc_index = -1;
-EXPORT_SYMBOL(enetc_phc_index);
+EXPORT_SYMBOL_GPL(enetc_phc_index);
static struct ptp_clock_info enetc_ptp_caps = {
.owner = THIS_MODULE,
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/main.c b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
index 7b48df3..b34f9e6 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
@@ -994,7 +994,7 @@
return -EINVAL;
if ((BIT(hweight8(tx_ant)) - 1) != tx_ant)
- tx_ant = BIT(ffs(tx_ant) - 1) - 1;
+ return -EINVAL;
mt7921_mutex_acquire(dev);
diff --git a/drivers/pinctrl/pinctrl-amd.c b/drivers/pinctrl/pinctrl-amd.c
index 384d931..7e41b48 100644
--- a/drivers/pinctrl/pinctrl-amd.c
+++ b/drivers/pinctrl/pinctrl-amd.c
@@ -752,7 +752,7 @@
break;
default:
- dev_err(&gpio_dev->pdev->dev, "Invalid config param %04x\n",
+ dev_dbg(&gpio_dev->pdev->dev, "Invalid config param %04x\n",
param);
return -ENOTSUPP;
}
@@ -805,7 +805,7 @@
break;
default:
- dev_err(&gpio_dev->pdev->dev,
+ dev_dbg(&gpio_dev->pdev->dev,
"Invalid config param %04x\n", param);
ret = -ENOTSUPP;
}
diff --git a/drivers/rtc/rtc-ds1685.c b/drivers/rtc/rtc-ds1685.c
index 75db7ab..1e09c9a 100644
--- a/drivers/rtc/rtc-ds1685.c
+++ b/drivers/rtc/rtc-ds1685.c
@@ -1438,7 +1438,7 @@
unreachable();
}
}
-EXPORT_SYMBOL(ds1685_rtc_poweroff);
+EXPORT_SYMBOL_GPL(ds1685_rtc_poweroff);
/* ----------------------------------------------------------------------- */
diff --git a/drivers/staging/rtl8712/os_intfs.c b/drivers/staging/rtl8712/os_intfs.c
index bc03384..2a4c6cf 100644
--- a/drivers/staging/rtl8712/os_intfs.c
+++ b/drivers/staging/rtl8712/os_intfs.c
@@ -323,6 +323,7 @@
mp871xinit(padapter);
init_default_value(padapter);
r8712_InitSwLeds(padapter);
+ mutex_init(&padapter->mutex_start);
return ret;
}
diff --git a/drivers/staging/rtl8712/usb_intf.c b/drivers/staging/rtl8712/usb_intf.c
index 6db2493..ed8e70c 100644
--- a/drivers/staging/rtl8712/usb_intf.c
+++ b/drivers/staging/rtl8712/usb_intf.c
@@ -567,7 +567,6 @@
if (rtl871x_load_fw(padapter))
goto deinit_drv_sw;
spin_lock_init(&padapter->lock_rx_ff0_filter);
- mutex_init(&padapter->mutex_start);
return 0;
deinit_drv_sw:
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 786db02..8be8f81 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -136,6 +136,7 @@
u32 tx_fifo_width;
u32 rx_fifo_depth;
bool setup;
+ unsigned long clk_rate;
int (*handle_rx)(struct uart_port *uport, u32 bytes, bool drop);
unsigned int baud;
void *rx_fifo;
@@ -1035,6 +1036,7 @@
goto out_restart_rx;
uport->uartclk = clk_rate;
+ port->clk_rate = clk_rate;
dev_pm_opp_set_rate(uport->dev, clk_rate);
ser_clk_cfg = SER_CLK_EN;
ser_clk_cfg |= clk_div << CLK_DIV_SHFT;
@@ -1304,10 +1306,13 @@
if (new_state == UART_PM_STATE_ON && old_state == UART_PM_STATE_OFF) {
geni_icc_enable(&port->se);
+ if (port->clk_rate)
+ dev_pm_opp_set_rate(uport->dev, port->clk_rate);
geni_se_resources_on(&port->se);
} else if (new_state == UART_PM_STATE_OFF &&
old_state == UART_PM_STATE_ON) {
geni_se_resources_off(&port->se);
+ dev_pm_opp_set_rate(uport->dev, 0);
geni_icc_disable(&port->se);
}
}
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index b57cf8d..e8f8a94 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -1170,9 +1170,18 @@
state |= BIT(offset);
else
state &= ~BIT(offset);
- sc16is7xx_port_write(port, SC16IS7XX_IOSTATE_REG, state);
+
+ /*
+ * If we write IOSTATE first, and then IODIR, the output value is not
+ * transferred to the corresponding I/O pin.
+ * The datasheet states that each register bit will be transferred to
+ * the corresponding I/O pin programmed as output when writing to
+ * IOSTATE. Therefore, configure direction first with IODIR, and then
+ * set value after with IOSTATE.
+ */
sc16is7xx_port_update(port, SC16IS7XX_IODIR_REG, BIT(offset),
BIT(offset));
+ sc16is7xx_port_write(port, SC16IS7XX_IOSTATE_REG, state);
return 0;
}
@@ -1258,6 +1267,12 @@
s->p[i].port.fifosize = SC16IS7XX_FIFO_SIZE;
s->p[i].port.flags = UPF_FIXED_TYPE | UPF_LOW_LATENCY;
s->p[i].port.iobase = i;
+ /*
+ * Use all ones as membase to make sure uart_configure_port() in
+ * serial_core.c does not abort for SPI/I2C devices where the
+ * membase address is not applicable.
+ */
+ s->p[i].port.membase = (void __iomem *)~0;
s->p[i].port.iotype = UPIO_PORT;
s->p[i].port.uartclk = freq;
s->p[i].port.rs485_config = sc16is7xx_config_rs485;
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index 669e7606..d8efa90 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -175,10 +175,12 @@
if (of_usb_get_phy_mode(np) == USBPHY_INTERFACE_MODE_ULPI)
data->ulpi = 1;
- of_property_read_u32(np, "samsung,picophy-pre-emp-curr-control",
- &data->emp_curr_control);
- of_property_read_u32(np, "samsung,picophy-dc-vol-level-adjust",
- &data->dc_vol_level_adjust);
+ if (of_property_read_u32(np, "samsung,picophy-pre-emp-curr-control",
+ &data->emp_curr_control))
+ data->emp_curr_control = -1;
+ if (of_property_read_u32(np, "samsung,picophy-dc-vol-level-adjust",
+ &data->dc_vol_level_adjust))
+ data->dc_vol_level_adjust = -1;
return data;
}
diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
index 2318c79..a2cb4f4 100644
--- a/drivers/usb/chipidea/usbmisc_imx.c
+++ b/drivers/usb/chipidea/usbmisc_imx.c
@@ -657,13 +657,15 @@
usbmisc->base + MX7D_USBNC_USB_CTRL2);
/* PHY tuning for signal quality */
reg = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG1);
- if (data->emp_curr_control && data->emp_curr_control <=
+ if (data->emp_curr_control >= 0 &&
+ data->emp_curr_control <=
(TXPREEMPAMPTUNE0_MASK >> TXPREEMPAMPTUNE0_BIT)) {
reg &= ~TXPREEMPAMPTUNE0_MASK;
reg |= (data->emp_curr_control << TXPREEMPAMPTUNE0_BIT);
}
- if (data->dc_vol_level_adjust && data->dc_vol_level_adjust <=
+ if (data->dc_vol_level_adjust >= 0 &&
+ data->dc_vol_level_adjust <=
(TXVREFTUNE0_MASK >> TXVREFTUNE0_BIT)) {
reg &= ~TXVREFTUNE0_MASK;
reg |= (data->dc_vol_level_adjust << TXVREFTUNE0_BIT);
diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c b/drivers/usb/dwc3/dwc3-meson-g12a.c
index 8f94bc4..d3b4dc00 100644
--- a/drivers/usb/dwc3/dwc3-meson-g12a.c
+++ b/drivers/usb/dwc3/dwc3-meson-g12a.c
@@ -938,6 +938,12 @@
return ret;
}
+ if (priv->drvdata->usb_post_init) {
+ ret = priv->drvdata->usb_post_init(priv);
+ if (ret)
+ return ret;
+ }
+
return 0;
}
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 1196417..f13930b 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -259,6 +259,7 @@
#define QUECTEL_PRODUCT_EM05G 0x030a
#define QUECTEL_PRODUCT_EM060K 0x030b
#define QUECTEL_PRODUCT_EM05G_CS 0x030c
+#define QUECTEL_PRODUCT_EM05GV2 0x030e
#define QUECTEL_PRODUCT_EM05CN_SG 0x0310
#define QUECTEL_PRODUCT_EM05G_SG 0x0311
#define QUECTEL_PRODUCT_EM05CN 0x0312
@@ -1190,6 +1191,8 @@
.driver_info = RSVD(6) | ZLP },
{ USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G_GR, 0xff),
.driver_info = RSVD(6) | ZLP },
+ { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05GV2, 0xff),
+ .driver_info = RSVD(4) | ZLP },
{ USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G_CS, 0xff),
.driver_info = RSVD(6) | ZLP },
{ USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G_RS, 0xff),
@@ -2232,6 +2235,10 @@
.driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
{ USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0db, 0xff), /* Foxconn T99W265 MBIM */
.driver_info = RSVD(3) },
+ { USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0ee, 0xff), /* Foxconn T99W368 MBIM */
+ .driver_info = RSVD(3) },
+ { USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0f0, 0xff), /* Foxconn T99W373 MBIM */
+ .driver_info = RSVD(3) },
{ USB_DEVICE(0x1508, 0x1001), /* Fibocom NL668 (IOT version) */
.driver_info = RSVD(4) | RSVD(5) | RSVD(6) },
{ USB_DEVICE(0x1782, 0x4d10) }, /* Fibocom L610 (AT mode) */
diff --git a/drivers/usb/typec/tcpm/tcpci.c b/drivers/usb/typec/tcpm/tcpci.c
index 5340a3a..a7b0134 100644
--- a/drivers/usb/typec/tcpm/tcpci.c
+++ b/drivers/usb/typec/tcpm/tcpci.c
@@ -13,11 +13,10 @@
#include <linux/property.h>
#include <linux/regmap.h>
#include <linux/usb/pd.h>
+#include <linux/usb/tcpci.h>
#include <linux/usb/tcpm.h>
#include <linux/usb/typec.h>
-#include "tcpci.h"
-
#define PD_RETRY_COUNT_DEFAULT 3
#define PD_RETRY_COUNT_3_0_OR_HIGHER 2
#define AUTO_DISCHARGE_DEFAULT_THRESHOLD_MV 3500
@@ -616,6 +615,10 @@
if (time_after(jiffies, timeout))
return -ETIMEDOUT;
+ ret = tcpci_write16(tcpci, TCPC_FAULT_STATUS, TCPC_FAULT_STATUS_ALL_REG_RST_TO_DEFAULT);
+ if (ret < 0)
+ return ret;
+
/* Handle vendor init */
if (tcpci->data->init) {
ret = tcpci->data->init(tcpci, tcpci->data);
diff --git a/drivers/usb/typec/tcpm/tcpci_maxim.c b/drivers/usb/typec/tcpm/tcpci_maxim.c
index df25055..4b6705f 100644
--- a/drivers/usb/typec/tcpm/tcpci_maxim.c
+++ b/drivers/usb/typec/tcpm/tcpci_maxim.c
@@ -11,11 +11,10 @@
#include <linux/module.h>
#include <linux/regmap.h>
#include <linux/usb/pd.h>
+#include <linux/usb/tcpci.h>
#include <linux/usb/tcpm.h>
#include <linux/usb/typec.h>
-#include "tcpci.h"
-
#define PD_ACTIVITY_TIMEOUT_MS 10000
#define TCPC_VENDOR_ALERT 0x80
diff --git a/drivers/usb/typec/tcpm/tcpci_mt6360.c b/drivers/usb/typec/tcpm/tcpci_mt6360.c
index 8a952ea..1b7c312 100644
--- a/drivers/usb/typec/tcpm/tcpci_mt6360.c
+++ b/drivers/usb/typec/tcpm/tcpci_mt6360.c
@@ -11,10 +11,9 @@
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
+#include <linux/usb/tcpci.h>
#include <linux/usb/tcpm.h>
-#include "tcpci.h"
-
#define MT6360_REG_PHYCTRL1 0x80
#define MT6360_REG_PHYCTRL3 0x82
#define MT6360_REG_PHYCTRL7 0x86
diff --git a/drivers/usb/typec/tcpm/tcpci_rt1711h.c b/drivers/usb/typec/tcpm/tcpci_rt1711h.c
index b56a088..3291ca4 100644
--- a/drivers/usb/typec/tcpm/tcpci_rt1711h.c
+++ b/drivers/usb/typec/tcpm/tcpci_rt1711h.c
@@ -10,9 +10,9 @@
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/gpio/consumer.h>
+#include <linux/usb/tcpci.h>
#include <linux/usb/tcpm.h>
#include <linux/regmap.h>
-#include "tcpci.h"
#define RT1711H_VID 0x29CF
#define RT1711H_PID 0x1711
diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
index eb44628..1dfbfe2 100644
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -2708,6 +2708,13 @@
port->sink_cap_done = true;
tcpm_set_state(port, ready_state(port), 0);
break;
+ /*
+ * Some port partners do not support GET_STATUS, avoid soft reset the link to
+ * prevent redundant power re-negotiation
+ */
+ case GET_STATUS_SEND:
+ tcpm_set_state(port, ready_state(port), 0);
+ break;
case SRC_READY:
case SNK_READY:
if (port->vdm_state > VDM_STATE_READY) {
diff --git a/fs/erofs/zdata.c b/fs/erofs/zdata.c
index 1799463..608106d 100644
--- a/fs/erofs/zdata.c
+++ b/fs/erofs/zdata.c
@@ -828,6 +828,8 @@
cur = end - min_t(erofs_off_t, offset + end - map->m_la, end);
if (!(map->m_flags & EROFS_MAP_MAPPED)) {
zero_user_segment(page, cur, end);
+ ++spiltted;
+ tight = false;
goto next_part;
}
diff --git a/fs/ksmbd/oplock.c b/fs/ksmbd/oplock.c
index 2e2df6e..9722e52 100644
--- a/fs/ksmbd/oplock.c
+++ b/fs/ksmbd/oplock.c
@@ -1485,7 +1485,7 @@
name_len < 4 ||
name_off + name_len > cc_len ||
(value_off & 0x7) != 0 ||
- (value_off && (value_off < name_off + name_len)) ||
+ (value_len && value_off < name_off + (name_len < 8 ? 8 : name_len)) ||
((u64)value_off + value_len > cc_len))
return ERR_PTR(-EINVAL);
diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c
index 0fde3d1..7983e8c 100644
--- a/fs/ksmbd/smb2pdu.c
+++ b/fs/ksmbd/smb2pdu.c
@@ -4289,7 +4289,7 @@
if (!strncmp(name, XATTR_USER_PREFIX, XATTR_USER_PREFIX_LEN))
name_len -= XATTR_USER_PREFIX_LEN;
- ptr = (char *)(&eainfo->name + name_len + 1);
+ ptr = eainfo->name + name_len + 1;
buf_free_len -= (offsetof(struct smb2_ea_info, name) +
name_len + 1);
/* bailout if xattr can't fit in buf_free_len */
diff --git a/fs/ksmbd/smb2pdu.h b/fs/ksmbd/smb2pdu.h
index ddc3cea..fa1cd55 100644
--- a/fs/ksmbd/smb2pdu.h
+++ b/fs/ksmbd/smb2pdu.h
@@ -1567,7 +1567,7 @@
__u8 Flags;
__u8 EaNameLength;
__le16 EaValueLength;
- char name[1];
+ char name[];
/* optionally followed by value */
} __packed; /* level 15 Query */
diff --git a/fs/nilfs2/alloc.c b/fs/nilfs2/alloc.c
index adf3bb0..279d945 100644
--- a/fs/nilfs2/alloc.c
+++ b/fs/nilfs2/alloc.c
@@ -205,7 +205,8 @@
int ret;
spin_lock(lock);
- if (prev->bh && blkoff == prev->blkoff) {
+ if (prev->bh && blkoff == prev->blkoff &&
+ likely(buffer_uptodate(prev->bh))) {
get_bh(prev->bh);
*bhp = prev->bh;
spin_unlock(lock);
diff --git a/fs/nilfs2/inode.c b/fs/nilfs2/inode.c
index b908216..324e232 100644
--- a/fs/nilfs2/inode.c
+++ b/fs/nilfs2/inode.c
@@ -1029,7 +1029,7 @@
int err;
spin_lock(&nilfs->ns_inode_lock);
- if (ii->i_bh == NULL) {
+ if (ii->i_bh == NULL || unlikely(!buffer_uptodate(ii->i_bh))) {
spin_unlock(&nilfs->ns_inode_lock);
err = nilfs_ifile_get_inode_block(ii->i_root->ifile,
inode->i_ino, pbh);
@@ -1038,7 +1038,10 @@
spin_lock(&nilfs->ns_inode_lock);
if (ii->i_bh == NULL)
ii->i_bh = *pbh;
- else {
+ else if (unlikely(!buffer_uptodate(ii->i_bh))) {
+ __brelse(ii->i_bh);
+ ii->i_bh = *pbh;
+ } else {
brelse(*pbh);
*pbh = ii->i_bh;
}
diff --git a/fs/nilfs2/segment.c b/fs/nilfs2/segment.c
index 9e86573..d61d702 100644
--- a/fs/nilfs2/segment.c
+++ b/fs/nilfs2/segment.c
@@ -725,6 +725,11 @@
struct page *page = pvec.pages[i];
lock_page(page);
+ if (unlikely(page->mapping != mapping)) {
+ /* Exclude pages removed from the address space */
+ unlock_page(page);
+ continue;
+ }
if (!page_has_buffers(page))
create_empty_buffers(page, i_blocksize(inode), 0);
unlock_page(page);
diff --git a/drivers/usb/typec/tcpm/tcpci.h b/include/linux/usb/tcpci.h
similarity index 98%
rename from drivers/usb/typec/tcpm/tcpci.h
rename to include/linux/usb/tcpci.h
index b2edd45..f7c01ce 100644
--- a/drivers/usb/typec/tcpm/tcpci.h
+++ b/include/linux/usb/tcpci.h
@@ -9,6 +9,7 @@
#define __LINUX_USB_TCPCI_H
#include <linux/usb/typec.h>
+#include <linux/usb/tcpm.h>
#define TCPC_VENDOR_ID 0x0
#define TCPC_PRODUCT_ID 0x2
@@ -102,6 +103,7 @@
#define TCPC_POWER_STATUS_SINKING_VBUS BIT(0)
#define TCPC_FAULT_STATUS 0x1f
+#define TCPC_FAULT_STATUS_ALL_REG_RST_TO_DEFAULT BIT(7)
#define TCPC_ALERT_EXTENDED 0x21
diff --git a/kernel/module.c b/kernel/module.c
index 5104989..775f009b 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -2234,12 +2234,20 @@
};
preempt_disable();
- if (!find_symbol(&fsa) || strong_try_module_get(fsa.owner)) {
- preempt_enable();
- return NULL;
+ if (!find_symbol(&fsa))
+ goto fail;
+ if (fsa.license != GPL_ONLY) {
+ pr_warn("failing symbol_get of non-GPLONLY symbol %s.\n",
+ symbol);
+ goto fail;
}
+ if (strong_try_module_get(fsa.owner))
+ goto fail;
preempt_enable();
return (void *)kernel_symbol_value(fsa.sym);
+fail:
+ preempt_enable();
+ return NULL;
}
EXPORT_SYMBOL_GPL(__symbol_get);
diff --git a/sound/usb/stream.c b/sound/usb/stream.c
index f10f4e6..3d4add9 100644
--- a/sound/usb/stream.c
+++ b/sound/usb/stream.c
@@ -1093,6 +1093,7 @@
int i, altno, err, stream;
struct audioformat *fp = NULL;
struct snd_usb_power_domain *pd = NULL;
+ bool set_iface_first;
int num, protocol;
dev = chip->dev;
@@ -1223,11 +1224,19 @@
return err;
}
+ set_iface_first = false;
+ if (protocol == UAC_VERSION_1 ||
+ (chip->quirk_flags & QUIRK_FLAG_SET_IFACE_FIRST))
+ set_iface_first = true;
+
/* try to set the interface... */
usb_set_interface(chip->dev, iface_no, 0);
+ if (set_iface_first)
+ usb_set_interface(chip->dev, iface_no, altno);
snd_usb_init_pitch(chip, fp);
snd_usb_init_sample_rate(chip, fp, fp->rate_max);
- usb_set_interface(chip->dev, iface_no, altno);
+ if (!set_iface_first)
+ usb_set_interface(chip->dev, iface_no, altno);
}
return 0;
}
